Keys On The Display Console; Keypad Tips - Precor C954 Owner's Manual

C O M M E R C

KEYS ON THE DISPLAY CONSOLE

The Precor treadmills have an easy-to-use keypad that is activated by the slightest
touch. Remind users that they only need to apply gentle pressure to these ultra-
sensitive keys.
Each key on the display console's keypad provides specific functions. Numeric keys
(numbered 1 - 0) let you enter data in answer to the display prompts and change the
speed during a workout. The standard keys, Change, Reset, Incline
Control
The following information explains the different uses of the keys from left to right.
To locate each key, look at the display console or refer to Diagram 19.
Diagram 19 Display console keypad.
Quick Start: Bypasses the remaining
Setup prompts and starts moving the
running belt. Smart Rate
default values apply.
Note: The CHANGE key is not shown in this diagram. Refer to Diagram 17 for its
location.

KEYPAD TIPS

• Accurate entries are required or features such as Smart Rate
properly.
• Answer the Setup prompts using the numeric keys or by pressing the
keys.
• Press Enter to select the information being displayed.
• Quick Start bypasses further selections and causes the running belt to start
moving. Default values apply (see QUICK START on page 30). The Smart
Rate ® display does not appear.
• A time-out occurs during the Setup prompts if the treadmill detects no key
presses for 2 seconds. The display returns to the Precor banner.
• Press Reset to return to the Precor banner.
• The Stop key does not appear in Diagram 19, but its function is vital as
explained in this section.
page 28
I A L P R O D
, and Enter, let you enter data as well as control your workout.
1
2
3
4
®
is inactive and
U C T S D I
Numeric keys: Indicate course #,
time limit, or goal entries. During
a workout, use these keys to
select a target Speed or Incline.
0
9
8
7
5 6
V I S I O N
, Speed
® will not work
or