Attach the power cord clips.
a. Wrap the clip around the power cord near its receptacle and
clamp it shut.
b. Insert the serrated portion of the clip into the hole located
under the front panel.
Commercial Treadmill Assembly Guide
Power cord clip
Front panel
c. Place the clips, as needed, along the length of the power cord
while you redirect it to the power outlet. The holes, found in
the frame beneath the side rail, are spaced one foot (31 cm)
along the length of the side rail.
Power cord
Important: Use the power cord clips so that the power cord
will not get pinched or damaged by the incline lift movement.
Side rail
8