Precor C952i Product Owners Manual page 17

Viewing the Hour Meter
HOURS appears on the display followed by the number of hours
that the unit has been in use. The treadmill tracks the elapsed
minutes, but the value that appears is truncated to the nearest full
hour.
3. When you are ready, press SELECT to move to the next display
(software version).
Viewing the Software Version and Part Numbers
UPPER SW scrolls across the display followed by the upper
board application software part number and version (for example,
48181-350).
4. To see the upper boot and lower board application software
version, press the SELECT key. If needed, you can move through
all three—upper board, upper boot, and lower board—using the
SELECT key.
5. Write the numbers below. You will need these numbers when you
call Customer Support with display-related questions. This
information will help rule out any software-related problems:
Upper Software P/N: _____________
Lower Software P/N: ___________________
Upper Boot Application P/N: ___________________
6. When you are ready, press the red STOP button or RESET to
move to the next display (error log).
Product Owner's Manual: Club Features
Viewing the Error Log
The first error log entry scrolls across the display. Up to ten error
codes can be retrieved. If there are no errors in the log, you will
see NO ERRORS displayed.
7. To view any additional error codes in the error log, use the arrow
keys. Each error code specifies when it occurred, listing the
odometer and hour meter values. Refer to Diagram 7.
Most recent error
1: ER33 AT 12,345,678 MILES 1,714 HOURS
Error code
Diagram 7: Error log
8. Copy the error code information to paper so you can provide it to
Customer Support if needed. Be sure to copy it exactly as shown.
9. When you no longer need the information in the error log, press
QUICKSTART for at least four seconds to erase the error log.
Continue to maintain light pressure on the key until the message
OK appears. When the key is released, NO ERRORS appears on
the display, which indicates the error log has been deleted.
Important: You cannot retrieve the error log once you have
deleted it. You may want to resolve any issues you are
experiencing with the treadmill before clearing the error log.
10. When you are ready, press SELECT, RESET, or the STOP button
to return to the Precor banner.
The hour meter at the time the error
was detected.
Odometer reading at the
time the error occurred.
15