Connecting Cables (P30) - Precor ELLIPTICAL FITNESS CROSSTRAINERS EFX 835 Assembling And Maintaining Manual

Installing the Console

Connecting Cables (P30)

After the console has been seated, separate the individual
cables out of the end of the cable assembly and attach them
to the appropriate circuit connectors inside the console. Refer
to the following diagram and table to identify the cables and
connectors.
Figure 30: Cable connections, P30 console
Table 2. P30 internal cable connections
Cable
Safety key
(treadmills only)
Auto Stop sensor
(treadmills only)
Data from base unit
Heart rate sensors
Connector Type
Six-contact strip, keyed
Four-contact strip, keyed
Eight-contact modular,
on flat gray cable
Four-contact strip, keyed
37
Circuit Connector
Location