1170 Upper Case And Lcd Unit - Lenovo V510–14IKB Hardware Maintenance Manual

• "1110 Wireless-LAN /Bluetooth card" on page 76
• "1120 Thermal fan assembly and Heat Sink assembly" on page 77
• "1130 Speaker assembly" on page 79
• "1140 Power board/ OneLink board" on page 79
• "1150 LED board" on page 81
Removal steps of the system board
1
Open the socket , and then pull out the touch pad cable connector
Remove six screws 3 .
Step Screw (quantity)
3
M2 × 3mm, flat-headed, nylon-coated (6)
Turn the system board over in the direction shown by arrow
5 , and then remove the system board.
When installing:
• Ensure that the connectors are attached firmly.
• When attaching the system board to the base cover, adjust the placement of the USB ports to make sure
that they are properly attached to the holes on the base cover. Improper placement of those jacks
might cause a damage.

1170 Upper case and LCD unit

For access, remove these FRUs in order:
• "1010 Optical disk drive/Removable battery" on page 66
• "1020 Base cover assembly" on page 68
82
Hardware Maintenance Manual
c
c
c
c
a
b
4 , detach the keyboard cable connector
2
.
c
c
Color Torque
Black
1.85 +/- 0.15kgf-cm