Transmission - Yaesu FTM-3200DR Operating Manual

Transmission

1. Press and hold PTT on the microphone.
In analog mode, both the upper and lower
portions of the mode/status indicator light
red.
In digital mode, the upper portion of the
mode/status indicator lights red and the low-
er portion of the mode/status indicator lights
blue.
Analog mode: Both the upper and lower portions light red
Digital mode: The upper portion lights red and the lower portion lights blue
VOL
SQL
TXPO
2. Speak into MIC on the microphone.
Note: Keep the microphone about 5 cm away from your mouth.
The sensitivity (gain) of the microphone can be adjusted. For details, refer to the
Advanced Manual (download from the Yaesu website).
3. Release PTT.
The transmit mode/status indicator turns off and the transceiver returns to the receive
mode.
Caution: Do not continue transmitting for a prolonged period. The transceiver may
overheat, resulting in malfunction or burn.
Note: "ERROR" appears if you attempt to transmit an unavailable frequency.
FTM-3200DR Operating Manual
DIAL
REV D/A M H z V / M
D W M W
SETUP
Application for FCC / IC
FCC ID: K6620523X50 / IC: 511B-20523X50
Basic Operation
MIC
PTT
ABC DEF
1 2 3 A
GHI JKL MNO
4 5 6 B
PQRS TUV WXYZ
7 8 9 C
0 D
DTMF MICROPHONE
MH-48
MIC
17