Setting The Aprs Beacon Automatic Transmission Interval - Yaesu FTM-100DR Instruction Manual

2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [14 BEACON TX], then press
.
4
Turn the DIAL and select [1 AUTO].
5
Press and select ON.
Tips • Factory shipping value: OFF
• The sorting condition will switch between ON, OFF,
and SMART each time
6
Press for one second or longer.
The display will return to the previous screen, and
automatic beacon transmission will start.
Tips • The " " icon indicating the beacon's automatic
transmission method will be displayed.
• The " " icon will be displayed when SmartBeaconing
Tips
• A beacon will be sent according to all the settings other than "1 AUTO" under [10 APRS] → [14
BEACON TX] on the set-up menu.
• The delay time of data transmission can be changed at [10 APRS] → [10 APRS TX DELAY] on the
set-up menu.

Setting the APRS beacon automatic transmission interval

The time interval for automatically sending an APRS beacon can be set.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
is pressed.
35
Transmitting APRS Beacons
.
is in operation.
TM
.