Rear Panel Connectors; Rear Panel - Yaesu FTM-3200DR Operating Manual

Vhf digital /analog transceiver
Hide thumbs Also See for FTM-3200DR:
Table of Contents

Advertisement

Rear Panel

ANT Coaxial Socket
Connect a 144 MHz antenna to this type-M (SO-239) socket using 50-Ohm coaxial
cable and a type-M (PL-259) plug. Make sure the antenna is designed specifically for
use on the operating frequency.
EXT SP Jack
This 2-contact 3.5-mm mini phone jack provides receiver audio output for an optional
external speaker. The audio impedance is 4 Ohms, and the level varies according
to the setting of the front panel's VOL control. Inserting a plug into this jack disables
audio from the transceiver's internal speaker.
13.8 V DC Cable
Connect the provided DC power supply cable (with fuse attached).
DATA Jack
Use this jack when updating the firmware. When a new firmware update for the FTM-
3200DR is available, go to the YAESU website to download the programming data
and update the FTM-3200DR to its newest state.
Cooling Fan
FTM-3200DR Operating Manual
FCC ID: K6620523X50 / IC: 511B-20523X50

Rear Panel Connectors

  
Application for FCC / IC
13

Advertisement

Table of Contents
loading

Table of Contents