1-6 Installing the Wireless AP7220
Nortel Networks Confidential
Figure 1-3
Optional accessories
Ballmount adapter
Installation Overview
Before installing the unit, review the
"Safety Guidelines"
Installation involves the following tasks:
•
•
•
These tasks are described briefly below.
Installation Pre-requisites
The AP7220 is intended for installation as part of a Wireless Mesh Network.
Before the AP7220 unit is installed and powered up, ensure that the
procedures described in the Planning and Engineering Guide have been
performed.
Physical Installation Requirements
The AP7220 unit is designed to be installed vertically with the baseplate
facing down (in indoor or outdoor locations).
nnn-nnnn-nnn Draft 01.00 March 2004
Installation Guide
at the start of this chapter.
Review
"Installation Pre-requisites"
Review
"Physical Installation Requirements"
Review
"Installation Scenarios and Flowchart"
Copyright
Ethernet cable
Omnimount bracket
"Limitations and Restrictions"
2004 Nortel Networks
©
Snap-on Ferrite
AC connector
Hex wrench
and
1