Nortel 6220 User Manual page 29

30
CSU(Corporate Service Unit)
Required Tools and Materials
Before you install the WLAN Cable Access Point 6220, ensure that the
followings are prepared for installation work.
APU
WLAN Cable Access Point 6220 APU package does not contain an
antenna and universal antenna bracket kit. For list of antennas and
accessories, see the WLAN Cable AP 6220 manual or contact your local
Nortel networks representative.
WLAN Cable Access Point 6220
One or more antenna cables (N-Male to the connector on the
external antenna)
External antennas selected by your self
Flat blade screwdrivers
Wire cutters
Phillips screwdriver
Torque wrench/driver
Another proper tools for installation
Heat gun with propane/Mapp torch
Trunk & Distribution Cable Connector and Drop Cable F-
connector port
RF cable for connecting between the APU and Testing Unit (if
needed)
Portable CATV Spectrum Analyzer
DVM(Digital Voltammeter)
"Document CD" and "Software CD" that contains the APU
Configurator, online help for the Configurator, and various
documents.
Advanced Tool: RF Testing Unit: CSU, Laptop computer with
radio card
NTPM99CA Rel 1.0 Issue 1 Oct. 2004