Asko T208V.W.U Instructions For Use Manual page 36

FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Errors indicated on the display unit (depending on the model) may include the following:
Problem/ Error indication on the display
error
ERROR_0
ERROR_1
ERROR_3
ERROR_4
ERROR_5
36
Error 3
E-O - Please contact ASKO Service.
E-1 - Thermistor fault. Please contact ASKO Service.
E-3 - Pump failure. Please contact ASKO Service.
E-4 - Please clean filters or contact ASKO Service.
E-5 - Max program time
Customer Care Center, 1-800-898-1879, www.askousa.com
Press the INFO button to display the
Info EXIT
error description.
Switch off the dryer and turn it back on.
5
What to do?
Control unit failure.
Call a service technician.
Temperature sensor failure.
Call a service technician.
Failure on the pump for pumping the
condensate into the condensate tank
Call a service technician.
Filter error.
Clean the filters. See chapter
"CLEANING AND MAINTENANCE" or
call a service technician.
Call a service technician.