Asko T208V.W.U Instructions For Use Manual page 23

STEP 5:
CHOOSING THE PROGRAM SETTINGS
Using the program settings, the drying programs can be further adjusted to your wishes.
Some program settings may not be available for your selected program.
Selected program settings will remain stored after the end of the drying cycle and may be changed
subsequently (except for delayed start which is not stored after the drying is complete).
1. Dryness level (extra dry)
2. Anti-crease
3. Load
Choose the program settings before pressing the START button.
When the drying program is in progress, program settings cannot be changed.
Briefl y pressing the button 1 under the program setting will display the information (INFO) about the
program setting.
Following are the program settings that may be selected using the buttons 1 to 6:
1. Dryness level (extra dry)
By pressing the button 1, you can choose between extra dryness levels (+, ++, +++).
Each time the button is pressed, the fi nal level of laundry dryness and drying time will change.
2. Anti-crease
This function pertains to what happens after the drying cycle.
By pressing the button 2, you can choose the duration of the anti-crease program from 0 hours
hours , in 1-hour steps.
3. Load
By pressing the button 3, you can choose between loads of the dryer.
Full load
Small load
Partial load
Selection of actual load aff ects the initially displayed anticipated drying time.
4. Lower drying temperature (gentle dry)
Press the button 4 to switch the gentle dry function on (ON) or off (OFF).
Customer Care Center, 1-800-898-1879, www.askousa.com
1 2 3
4. Lower drying temperature (gentle dry)
5. Time (timed drying)
6. Start delay
4 5 6
to 4
23