Asko T208V.W.U Instructions For Use Manual page 14

EVACUATION OF HUMID AIR
Use the supplied air exhaust hose to convey the
humid air from the dryer is through an opening
(ventilation system, window etc.).
Connecting the air exhaust hose to the
dryer
The dryer allows three possibilities for air
evacuation: on the rear, on the right, and on the left
side. Upon delivery, the opening on the back is open
and a connection fi tting is installed on it (1).
Side openings are covered with two caps.
The machine comes supplied with an air exhaust
hose (3) and two clamps (2).
Installation
Slip the exhaust hose (3) over the connection fi tting
(1) and fasten it with a clamp (2).
14
1
2 3
Customer Care Center, 1-800-898-1879, www.askousa.com
Fitting the air exhaust hose to another opening
Instead of on the rear opening, the air exhaust hose
can be fi tted on one of the side openings.
• Move the connection fi tting from the rear opening
(1) to the side opening. Then, connect the air
exhaust hose and secure it with a clamp (2).
3 2
• Use a cap to close the opening on the back of the
dryer.
1