Using A Usb Cd Drive, Perform The Following Steps; Using A Usb Flash Drive, Perform The Following Steps - Fluke OptiView Getting Started Manual

OptiView
TM
Getting Started Guide

Using a USB CD drive, perform the following steps:

1. Insert the OptiView WNA Options CD into the external CD drive.
Autostart should launch the user interface. If not, use Windows
Explorer and double-click on launch.exe on the WNA Options CD.
2. Select the Install Software button.
3. Select the Install OPVWNA-Vx.xx button. The InstallShield Wizard
is executed and the installation begins. Follow the on-screen
instructions to complete the installation.
4. Insert the WNA WLAN adapter and initialization begins. Refer to
Installing the Wireless LAN Card on page 10

Using a USB Flash Drive, perform the following steps:

Note
1. Using a PC, copy the file opvwna-vxxx.exe from the OptiView WNA
Options CD to the USB flash drive. The file is located in the
\software directory on the CD.
2. Install the USB flash drive in one of the three USB ports on the
analyzer.
8
Remove the Fluke Networks Wireless LAN adapter (WNA WLAN adapter)
from the analyzer before installing the software update. If you accidentally
install the software with the adapter installed, you may have to reboot your
analyzer.
Remove the Fluke Networks Wireless LAN adapter (WNA WLAN adapter)
from the analyzer before installing the software update. If you accidentally
install the software with the adapter installed, you may have to reboot your
analyzer.
Note