Fcc Hearing-Aid Compatibility (Hac) Regulations For Wireless Devices - Pantech P5000 User Manual

surface, and the user suspects damage, take it to a service center for inspection.
– Use your battery for the specified purpose only.
– The closer you are to your network's base station, the longer your phone usage time because
less battery power is consumed for the connection.
– The battery recharging time varies depending on the remaining battery capacity and the
battery and charger type you use.
– Battery life inevitably shortens over time.
– Use an authorized battery and charger only.
– Since overcharging may shorten battery life, remove the phone from its charger once it is fully
charged. Unplug the charger, once charging is complete. Leaving the battery in hot or cold
places, especially inside a car in summer or winter, may reduce the capacity and life of the
battery. Always keep the battery within normal temperatures.
– To prevent injury or burns, ensure that no metal objects come into contact with the + and –
terminals of the battery.
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT
Docket 01-309 modified the exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids. The
intent of the HAC Act is to ensure reasonable access to telecommunications services for persons
with hearing disabilities.
While some wireless phones are used near some hearing devices (hearing aids and cochlear
implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones also vary in the amount of
01
02
03
04
05
06
07
08
105 105