How To Use Ipod Mode - Fiat Radio 3.0 Manual

All Random
Proceed as follows:
A Push the random button (two)
during playback, and then press the
button again within three seconds
to play the tracks in the USB device
randomly. "ALL RDM" is displayed
( is displayed next to RDM at the
bottom of the display area).
B Push the button again to cancel the
random playback.
Switching The Display
The information displayed on the audio
display changes as follows each time
the text button (three) is pressed during
playback
Button
18
Note:
The information (artist name, music
name) is displayed only when the
USB device information in the USB
device has information which can be
displayed on the screen.
This unit cannot display some
characters. Characters which cannot
be displayed are indicated by an
asterisk (*).
Display Scroll
Only 13 characters can be displayed at
one time. To display the rest of the
characters of a long title, push and hold
the text button (three).
The display scrolls the next
13 characters. Push and hold the text
button (three) again after the last
Information
13 characters have been displayed to
Displayed On
return to the beginning of the title.
Audio Display
Note: The number of characters which
File number/
Elapsed time
can be displayed is restricted.
Folder number/ File
Error Messages
number
When the message "CHECK USB" is
File name
displayed, it indicates that there is some
Folder name
error in the USB device.
Album name
Song name
Artist name
Verify that the content recorded in the
USB device has MP3/WMA/AAC files
and reconnect correctly. If the message
reappears, contact a authorized
dealership.

How to Use iPod Mode

An iPod may not be compatible
depending on the model or OS version.
In this case, an error message is
displayed.
Note: The iPod functions on the iPod
cannot be operated while it is con-
nected to the unit because the unit
controls the iPod functions.
Playback
Proceed as follows:
A Switch the ignition to ACC or ON.
B Push the power/volume dial to turn
the audio system on.
C Push the MEDIA button to switch to
the iPod mode and start playback.
Note:
When an iPod is not connected,
the mode does not switch to the iPod
mode.
When there is no playable data in
the iPod, "NO CONTENTS" is flashed.