Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen Through A Headphone - Philips BTD3180 User Manual

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can
select CD, FM, or USB as alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold
TIME/SLEEP for more than two seconds.
» The hour digits appear and begin to
blink.
2
(or +/-) repeatedly to set hour,
Press /
and then press TIME/SLEEP.
» The minute digits appear and begin to
blink.
3
Repeat step 2 to set minute, select a
source (disc, USB, or tuner), and adjust
volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press TIME/SLEEP repeatedly to activate
•
or deactivate the alarm.
» If the timer is activated,
Tip
•
If the disc/USB source is selected, but no disc is placed
or no USB connected, the system switches to the tuner
source automatically.
EN
20
is displayed.

Set the sleep timer

• To set the sleep timer, in power-on mode,
press TIME/SLEEP repeatedly to select a
set period of time (in minutes).
» When the sleep timer is activated,
is displayed.
To deactivate sleep timer:
Press TIME/SLEEP repeatedly until [SLP
•
OFF] (sleep off) is displayed.
» When the sleep timer is deactivated,
disappears.

Listen through a headphone

Plug a headphone (not supplied) into the
socket on front of this product.