TP-Link Archer VR300 User Manual page 66

Chapter 13
3 Click Start WPS
4 Press the WPS button of the client device directly.
5 The router's LED flashes quickly for about 2 minutes during the WPS process.
6 When the LED is on, the client device has successfully connected to the modem
router.
Method 3: Enter the modem router's PIN on your client device
Use this method if your client device asks for the modem router's PIN.
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2 Go to Advanced
3 Take a note of the Current PIN of the modem router. You can also click the
button to get a new PIN.
4 On the client device, enter the modem router's PIN. (The default PIN is also printed
on the label of the modem router.)
5 The router's LED flashes quickly for about two minutes during the WPS process.
6 When the LED is on, the client device has successfully connected to the modem
router.
Note:
The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make sure the
wireless function is enabled before configuring WPS.
Method 4: Enter the client device's PIN on the modem router
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
on the page.
> Wireless > WPS page. Click
Specify Your Network Settings
Method Two--PIN.
Generate
62