Table of Contents
Advertisement
Chapter 9
Done!
1 )
IP Range:
Enter the IP address. The field can be single IP
address or IP address range according to your demands.
When you configure the single IP address, the computer
with this IP address will get independent given bandwidth.
When you configure the IP address range, all computers
in the range will share the given bandwidth.
2 )
Port Range:
Enable the port range. The default port range
of TCP protocol or UDP protocol is from 1 to 65535.
3 )
Protocol:
Keep the default setting. Or you can choose the
TCP protocol or UDP protocol.
4 )
Priority:
Keep the default setting. You can change the
value if you want to first guarantee the bandwidth for one
computer. The smaller value has the higher priority.
5 )
Upstream/Downstream:
to your division.
6 ) Check to enable this entry and click Save.
7 Repeat Step 6 to add a rule for the other computer.
Now you and your roommate have an independent bandwidth.
Bandwidth Control
Enter the bandwidth according
33
Hide quick links:
Advertisement
Table of Contents
