When You Cannot Connect Using Wi-Fi Direct (Simple Ap) Connection - Epson ET-2700 Series User Manual

User's Guide
❏ An access point that is compliant with both IEEE802.11a and IEEE802.11g has SSIDs of 2.4 GHz and 5 GHz. If
you connect the computer or smart device to a 5 GHz SSID, you cannot connect to the printer because the
printer only supports communication over 2.4 GHz. Connect the computer or smart device to the same SSID as
the printer.
❏ Most access points have a privacy separator feature that blocks communication between connected devices. If
you cannot communicate between the printer and the computer or smart device even if they are connected to
the same network, disable the privacy separator on the access point. See the manual provided with the access
point for details.
Related Information
"Checking the SSID Connected to the Printer" on page 111
&
"Checking the SSID for the Computer" on page 111
&
When You Cannot Connect Using Wi-Fi Direct (Simple AP)
Connection
If four devices have already been connected, you cannot connect any more devices. See the following and try to re-
connect.
Check how many devices are connected
Check how many devices are connected to the printer. If the number of connected devices has not exceeded the
maximum, a connection error may have occurred. Move the printer and computer or smart device closer to the
Solving Problems
109