How To Test Infusion Devices - Fluke IDA-5 User Manual

IDA-5
Users Manual

How to Test Infusion Devices

When you test an infusion device, it is recommended that you record the details of the
device you are testing and the test parameters. From the Status All Channels screen,
select SETUP for the relevant channel. These examples use channel 1.
The Channel 1 Setup screen described in Table 4 is shown.
Control
Device Information
Template
Occlusion
Flow
PCA/Dual Flow
10
Table 4. Channel Setup Screen Controls
C h a n n e l 1 S e t u p
Device Information
Template
Occlusion
Flow
PCA/Dual Flow
Press ESC for Status Screen
Shows a screen that lets you record infusion device data and test details.
Shows a screen that lets you set a template to control a sequence of tests.
Occlusion test without details.
Flow test without details.
PCA or dual flow test without details – asks for necessary PCA/dual flow
parameters.
Description
gir06.eps