Safety Information - Fluke IDA-5 User Manual

IDA-5
Users Manual

Safety Information

A Warning identifies hazardous conditions and actions that could cause bodily harm or
death. A Caution identifies conditions and actions that could harm the Product, the
equipment under test, or cause permanent loss of data.
To prevent possible electrical shock, fire, or personal injury:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
Read all safety Information before you use the Product.
Read the User Manual before you operate the Product.
Use the product only as specified, or the protection supplied
by the product can be compromised.
Do not use the Product if it operates incorrectly.
Do not use an incompatible power receptacle. The Product
power cord must be connected to a power receptacle that
provides voltage and current within the specified rating for
the system.
Connect an approved three-conductor mains power cord to
a grounded power outlet.
Never use a two-prong plug adapter to connect primary
power to the Product.
Turn the Product off and remove the mains power cord
before cleaning the outer surface of the Product.
Do not open the Product unless you are qualified.
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
Do not use the Product on infusion devices that are
attached to patients.
Do not reuse test tubing or syringes for patient infusion
Avoid possible contamination of reusable components due
to backflow conditions. Some older style infusion devices
may have reusable components that could come in direct
contact with the fluids being pumped. When testing these
types of devices take care to avoid possible contamination
of reusable components.
Do not use delivery set or components that have been used
for testing for patient infusion.
 Warning