Emerson Rosemount OCX8800 Instruction Manual page 185

Instruction Manual
IM-106-880C, OI
Index
Number
Units
DISABLE_2 16
DISABLE_3 17
DISABLE_4 18
GRANT_DENY 9
IN_1 11
IN_2 12
IN_3 13
IN_4 14
MIN_GOOD 20
OP_SELECT 22
OUT 7
OUT_UNITS 8
SELECTED 21
SELECT_TYPE 19
STATUS_OPTS 10
STRATEGY 3
1
TAG_DESC 2
23
Input Selector (ISEL) Function
Block
Description
None A Connection from another block that disables the associated input fromthe
selection.
None A Connection from another block that disables the associated input fromthe
selection.
None A Connection from another block that disables the associated input fromthe
selection.
None Options for controlling access of host computers and local control panels to
operating, tuning, and alarm parameters of the block. Not used by device.
Determinedby The connection input from another block. One of the inputs to be selected
source from.
Determinedby The connection input from another block. One of the inputs to be selected
source from.
Determinedby The connection input from another block. One of the inputs to be selected
source from.
Determinedby The connection input from another block. One of the inputs to be selected
source from.
None The minimum number of good inputs The actual, target, permitted, and
normal modes of the block. Target: The mode to "go to" Actual: The mode the
"block is currently in" Permitted: Allow ed modes that target may take on
Normal: Most common mode for target.
None Overrides the algorithm to select 1 of the 4 inputs regardless of the selection
type.
EU of IN The block output value and status.
None The engineering units of the output. Typically, all inputs have the same units
and the value is also the same.
None The selected input number (1–4).
None Specifies selection method (see Block Execution).
None Allows selection of options for status handling and processing. The supported
status option for the PID block is Target to Manual if Bad IN.
None The strategy field can be used to identify grouping of blocks. This data is not
checked or processed by the block.
None The revision level of the static data associated w ith the function block. The
revision value w ill be incremented each time a static parameter value in the
block is changed.
None The user description of the intended application of the block.
None This alert is generated by any change to the static data.
Section 7: Foundation
Fieldbus
April 2017
15
9