Table of Contents
Advertisement
VII-6 Local Settings
Local Settings are for your Master AP. You can set the operation mode and
view network settings (clients and logs) specifically for the Master AP, as well
as other management settings such as date/time, admin accounts, firmware
and reset.
VII-6-1
Operation Mode
The access point can function in five different modes. Set the operation mode
of the access point here.
1. AP Mode: The device acts as a standalone access point
2. Repeater Mode: The device acts as a wireless repeater (also called wireless
range extender) that takes an existing signal from a wireless router or
wireless access point and rebroadcasts it to create a second network.
3. AP Controller Mode: The device acts as the designated master of the AP
array
4. Managed AP Mode: The device acts as a slave AP within the AP array.
5. Client Bridge Mode: The device is now a client bridge. The client bridge
receives wireless signal and provides it to devices connected to the bridge
(via Ethernet cable).
222
Office 1-2-3 Interface
Advertisement
Table of Contents
