Table of Contents
Advertisement
64
2
Press your finger to the BPL5M hot-swap cage to release the drive
tray.
3
Remove the four tray screws to open the drive tray. Keep the
screws for later use.
4
When applicable, pull out any previously installed hard disk.
5
Install a hard disk on the drive tray then secure it with the four
tray screws you have removed earlier.
6
Insert the tray into the hot-swap cage with the lever still extended.
Make sure that the drive is properly inserted before closing the
lever.
7
Push the lever back until it clicks into place.
3 Upgrading your system
Advertisement
Table of Contents
