Table of Contents
Advertisement
116
Parameter
Onboard VGA
Onboard LAN
Onboard SCSI
USB Host
Controller
PCI IRQ Sharing
Description
Allows you to manually assign the
interrupt for the onboard VGA when the
PCI IRQ Setting parameter is set to Manual.
This parameter is grayed-out and is not
user-configurable when the PCI IRQ Setting
is set to Auto.
When you set the PCI IRQ Setting
parameter to Auto, this parameter
specifies the auto-assigned interrupt for
the onboard LAN controlers installed in
your system.
When you set the PCI IRQ Setting
parameter to Manual, you need to specify
the interrupt that you want to assign for
the onboard LAN controllers installed in
your system.
Allows you to manually assign the
interrupt for the onboard SCSI when the
PCI IRQ Setting parameter is set to Manual.
This parameter is grayed-out and is not
user-configurable when the PCI IRQ Setting
is set to Auto.
Allows you to manually assign the
interrupt for the USB host controller when
the PCI IRQ Setting parameter is set to
Manual. This parameter is grayed-out and
is not user-configurable when the PCI IRQ
Setting is set to Auto.
Setting this parameter to Yes allows you to
assign the same IRQ to two different
devices. To disable the feature, select No.
Note: If there are no IRQs available to
assign for the remaining device function, it
is recommended that you enable this
parameter.
4 BIOS Setup utility
Option
User input
User input
Disabled
Enabled
Yes
No
Advertisement
Table of Contents
