Table of Contents
Advertisement
108
Parameter
IPMI BIOS
Version
BMC
Firmware
Version
System Event
Logging
Clear Event
Log Area
Existing Event
Log Number
Remaining
Event Log
Number
View Event
Logs
Event Control
BIOS POST
Memory ECC
PCI Devices
Description
Shows the version of IPMI BIOS
Specifies the version of BaseBoard
Management Controller (BMC) Firmware
Enables or disables the event logging
function of your system
Clears the event log whenever the event
log area is full
Number of events currently located in the
event log area
Number of spaces that are still available
for logging system events
Opens the system event log file for viewing
BIOS checks the bad processors and
memory modules during POST. When this
parameter is enabled, BIOS will stop POST
operation whenever it finds a bad
processor or memory. Otherwise, if
disabled the system will continue running.
ECC (error correcting code) tests the
accuracy of data as it passes in and out of
memory. This parameter enables or
disables the monitoring of this function.
PCI (Peripheral Component Interconnect) is
a 32-bit bus that supports a 64-bit
extension for new processors, such as
Pentium processors. It can run at clock
speeds of 33 or 66 MHz. This parameter
monitors the activity of this bus when set
to Enabled.
4 BIOS Setup utility
Option
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Advertisement
Table of Contents
