Table of Contents
Advertisement
110
Parameter
Console
Redirection
Hidden
Partition
Communication
Protocol
COM Port Baud
Rate
Description
This parameter lets you enable or disable
the connection to the RDM manager
station. If enabled and conditions are met,
the RDM-enabled server automatically
dials the RDM manager station using the
phone number specified in the Remote
Console Phone No. parameter when the
server reboots. Once the connection is
established, both the RDM server and RDM
manager station display the same screen
which enables the RDM manager station to
function the same as the server console.
Setting this to Disabled deactivates the
RDM manager station.
If you want the hidden partition to
become accessible, set this parameter to
Enabled. When enabled, the server boots
to the hidden partition.
This parameter specifies the parity, stop
bits, and data length for the COM port to
use for the RDM connection. This is fixed
at N (none), 8, 1 setting and is
non-configurable.
This parameter lets you set the transfer
rate of the COM for the RDM connection.
The parameter setting depends on your
modem specification; therefore, before
you change the setting of this parameter,
check the documentation that came with
your modem.
4 BIOS Setup utility
Option
Disabled
Enabled
Disabled
Enabled
N, 8, 1
9600
57600
Advertisement
Table of Contents
