Table of Contents
Advertisement
Troubleshooting
Operator Troubleshooting
Operators occasionally have to clear film jams in the imager or correct other simple
problems. If more serious malfunctions occur, operators must call a trained Kodak
service technician (see page 5-18).
To help operators monitor imager operation and identify problems, the imager
displays status and error messages. The following paragraphs describe these error
messages and list corrective actions the operator should take.
Local Panel Message Types
The Local Panel displays two types of messages, as described below.
Status Line
Message Line
Scroll Indicator for Lists
Note
A scroll icon at the beginning of the message line indicates that more
information (above or below the line) is available. Press the Local Panel = or O
key to display another line of information.
Status Information
Status messages (see Table 5-1) are strictly informational and require no operator
action.
Error Messages or Notices
Error messages (see Table 5-2) indicate an error condition within the imager. In
some cases, error messages can be cleared by operator action, but in many cases a
service call will be required. Notices are brief messages identifying special print
requests (for example, calibration prints).
2000 March Rev. B
8754020
S04 Stopped
= 125
P145 Media Type Err
Troubleshooting
Sheets
remaining
in Cartridge
5-1
Advertisement
Table of Contents
