Table of Contents
Advertisement
An example of connection diagram is shown in the below figure.
2.3 Connect your wireless Note PC
The Gateway has two access points that allows you to connect wireless devices to your home
network:
4x4) IEEE 802.11ac access point offers superior transfer rates, is less sensitive to
interference and allows you to connect IEEE802.11a/n/ac wireless clients.
clients. Use this access point for wireless clients that don't support 5 GHz.
2.3.1 How to connect your wireless Note PC
Requirements
equipped with a wireless client.
network device must be configured to obtain an IP address automatically. This is the default setting.
Procedure
If you want to connect a computer using the wireless network, configure the wireless client on your computer
with the wireless
settings printed on the Gateway's side or back panel label.
For the network name, two values are available:
Hide quick links:
Advertisement
Table of Contents
