Quick Commissioning Using The Bop-2 Operator Panel - Siemens SINAMICS G120C USS/MB Operating Instructions Manual
Sinamics g120c series low voltage converter built-in units with frame sizes aa - f
Hide thumbs
Also See for SINAMICS G120C USS/MB:
- Operating instructions manual (478 pages) ,
- Compact operating instructions (92 pages) ,
- Getting started (68 pages)
Table of Contents
Advertisement
Commissioning
5.4 Quick commissioning using the BOP-2 operator panel
5.4
Quick commissioning using the BOP-2 operator panel
Plug Basic Operator Panel BOP‑2 into the inverter
Procedure
To plug Basic Operator Panel BOP‑2 onto the inverter, proceed as follows:
1. Remove the blanking cover of the inverter.
2. Locate the lower edge of the BOP-2 housing in the matching
recess of the inverter housing.
3. Press the BOP‑2 onto the inverter until you hear the latching
mechanism on the inverter housing engage.
You have plugged the BOP-2 onto the inverter
When you power up the inverter, the BOP-2 will be ready for operation.
120
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
SINAMICS G120C converter
- Quick Links:
- Alarms, Faults and System Messages
Hide quick links:
Advertisement
Table of Contents
