Fujitsu ETERNUS AF250 S2 Configuration Manual page 30

Chapter 2 Rack Installation
2.2 Controller Enclosure Installation (for Regions other than the EMEIA, Central American, and Caribbean Regions)
4
Install the controller enclosure in the rack.
5
Fasten the controller enclosure in the rack.
Use three M5 screws to fasten it in the rack pillar.
M5 screw
6
Attach the flange cover.
Do
When installing or removing the controller enclosure to or from the rack,
•
make sure that the sides and the bottom of the controller enclosure are held
by two or more people. Failure to do so may cause injury.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
M5 screws
30
P3AG-1832-04ENZ0