Fujitsu ETERNUS AF250 S2 Configuration Manual page 159

Chapter 11 Solution Configuration
11.1 Continuous Business
Register the business server (ETERNUS SF AdvancedCopy Manager agent) and the business volumes that are
to be backed up in the operation management server (ETERNUS SF AdvancedCopy Manager manager).
REC related settings and connection path settings must be performed in the ETERNUS AF.
●
Required Environment
ETERNUS SF AdvancedCopy Manager agent and a gateway device (that connects the storage systems) must
be installed in each operation site and backup site. ETERNUS SF AdvancedCopy Manager manager must be
installed in either of the sites (one ETERNUS SF AdvancedCopy Manager manager can manage the ETERNUS
SF AdvancedCopy Manager agents of both sites).
●
Configuration Procedure
Settings for the ETERNUS AF
•
Register the following information with ETERNUS Web GUI.
Host interface settings
-
Set the port mode of the host interface to RA or CA/RA.
Copy table size settings
-
Set a memory area to manage the REC progress.
Copy path settings
-
Set the information of the copy paths between the storage systems to perform an REC. Confirm that the
storage systems can communicate with each other after setting of the copy paths is complete.
- REC Buffer settings
This setting is required when an REC is performed in the Consistency mode. The Consistency mode guar-
antees the order of data transfers to the connection destination storage system for all of the specified
REC sessions.
- REC Disk Buffer registration
Set the REC Disk Buffer when REC Buffer capacity is to be expanded.
Settings for ETERNUS SF AdvancedCopy Manager
•
Register the following information in the operation management server (ETERNUS SF AdvancedCopy Man-
ager).
Registration of the ETERNUS SF AdvancedCopy Manger license
-
Register a license key via the ETERNUS SF Web Console or ETERNUS SF CLI.
Business server registration
-
Register the server in which the ETERNUS SF AdvancedCopy Manager agent is running as the business
server in the operation management server.
Registration of the device information in the server that is the management target
-
Register the device information in the server that is the management target to the operation manage-
ment server.
Settings for replication
-
Register the replication source volumes and the replication destination volumes.
For more details on the settings for ETERNUS SF AdvancedCopy Manager, refer to "ETERNUS SF AdvancedCopy
Manager Operation Guide".
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
159
P3AG-1832-04ENZ0