Installing The Display Panel; G-Sensor Board; Removing The G-Sensor Board - Dell Latitude 7280 Owner's Manual

Installing the display panel

1 Place the display panel near the left over portion of the display cover .
2 Connect the display cable from the display cover to the display panel.
3 Affix the tape to secure the display cable on the display panel.
4 Connect the G-sensor cable to the connector on the display panel.
5 Flip the display panel on the display cover.
6 Press the edges to secure the display panel to the display assembly.
7 Install the:
a WLAN card
b WWAN card
c battery
d base cover
e Micro SD
8 Follow the procedure in

G-sensor board

Removing the G-sensor board

1 Follow the procedure in
2 Remove the:
a Micro SD
b base cover
c battery
d WLAN card
e WWAN card
f display assembly
g display panel
3 To remove the G-sensor board:
a Remove the M2.0 x 3.0 screw that secures the G-sensor board to the display cover [1].
b Flip the G-sensor board to reveal the display cable [2].
c Disconnect the display cable from the G-sensor board [3].
After working inside your computer.
Before working inside your computer.
Removing and installing components 37