Installing The Smart Card Cage; Heat Sink; Removing Heat Sink Assembly - Dell Latitude 7280 Owner's Manual

Installing the smart card cage

1 Slide the smart card cage into the slot to align with the screw holders on the computer.
2 Replace the M2.0 x 1.7 screws to secure the smart card cage to the computer.
3 Affix the thermal pad in the SSD slot.
4 Affix the LED board cable and connect it to the LED board on the computer.
5 Affix the smart card cable and connect it to the USH board on the computer .
6 Install the:
a SSD card
b battery
c base cover
d Micro SD
7 Follow the procedure in

Heat Sink

Removing heat sink assembly

1 Follow the procedure in
2 Remove the:
a Micro SD
b base cover
c battery
3 To remove the heat sink assembly:
a Disconnect the fan cable from the system board [1].
22 Removing and installing components
After working inside your computer.
Before working inside your computer.