b Lift the speaker module from the computer.
NOTE:
Installing the speaker module
1
Place the speaker module into the slots on the computer.
2
Route the speaker cable through the routing channel and secure it with tapes.
3
Connect the speaker cable to the connector on the system board.
4
Connect the LED cable to the connector on the palm rest.
5
Install the:
a
power board
b
battery
c
base cover
d
Micro SD
6
Follow the procedure in
Fingerprint Board
Removing the fingerprint reader board
1
Follow the procedure in
2
Remove:
a
Micro SD
b
base cover
c
battery
18
Removing and installing components
You can use a plastic scribe to lift the speaker module from the computer.
After working inside your
computer.
Before working inside your
computer.