3
Use a plastic scribe to pry the base cover starting from the hinges at the top edge of the base cover and lift it from the computer.
NOTE:
The recesses are located near the hinges at the rear side of the computer.
Installing the base cover
1
Align the base cover tabs to the slots on the edges of the computer.
2
Press the edges of the cover until it clicks into place.
3
Tighten the M2.5 x 5.0 captive screws to secure the base cover to the computer.
4
Follow the procedure in
Battery
Removing the battery
1
Follow the procedure in
2
Remove:
a
MicroSD card
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
11