Installing Smart Card Cage; Touchpad; Removing Touchpad Buttons Board - Dell Latitude 7380 Owner's Manual

b. Slide and lift the smart card cage from the computer [2].

Installing smart card cage

1. Slide the smart card cage into the slot to align with the tabs on the computer.
2. Tighten the M2 x 3 screws to secure the smart card cage to the computer.
3. Affix the smart card cable and connect it to the connector on the computer .
4. Install the PCIe SSD card.
5. Connect the battery cable to the connector on the system board.
6. Install the base cover.
7. Follow the procedure in

Touchpad

Removing touchpad buttons board

1. Follow the procedure in
2. Remove the base cover.
3. Disconnect the battery cable from the connector on the system board.
4. To disconnect the smart card cable:
a. Disconnect the smart card cable [1].
b. Lift the smart card cable that is affixed to the computer [2] to reveal the touchpad buttons board cable.
c. Remove the adhesive tape that secures the speaker cable to the touchpad panel [3].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 29