Table of Contents
Advertisement
If you have a digital component such as a
receiver (amplifier) with a digital connector, DAT
or MD
Connect the component via the OPTICAL or COAXIAL
connector using an optical or coaxial digital connecting cord (not
supplied).
x When using an optical digital connecting cord
Optical digital connecting cord
(not supplied)
CD/DVD player
OPTICAL
COAXIAL
PCM/DTS/
DOLBY DIGITAL (AC – 3)
/MPEG
x When using a coaxial digital connecting cord
Coaxial digital connecting cord
(not supplied)
CD/DVD player
OPTICAL
COAXIAL
PCM/DTS/
DOLBY DIGITAL (AC – 3)
/MPEG
Notes
• Refer to the instructions supplied with the component to be
connected.
• You cannot make digital audio recordings of discs recorded in
multi-channel surround format directly using an MD deck or
DAT deck.
When you make the connections above, do not set
"DOLBY DIGITAL" to "DOLBY DIGITAL," "MPEG" to "MPEG"
and "DTS" to "ON." If you do, a loud noise will suddenly
come out from the speakers, affecting your ears or causing
the speakers to be damaged.
Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.
DIGITAL IN
OPTICAL
Receiver (Amplifier)
with a digital
connector, MD deck,
DAT deck, etc.
DIGITAL IN
COAXIAL
z
If you have a digital component with a built-in DTS, Dolby*
Digital or MPEG decoder
You can enjoy multichannel surround sound by connecting the
component via the OPTICAL or COAXIAL connector using an
optical or coaxial digital connecting cord (not supplied). For
details on hookups and settings, see page 19.
Setups for the player
Some setup adjustments are necessary for the player
depending on the components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 46.
• To listen to the sound through speakers connected
to a receiver (amplifier) which has a digital
connector or to output the sound to a digital
component such as a DAT or MD deck
When you play a DVD, set "DIGITAL OUT" in
"AUDIO SETUP" to "ON" and then set "DOLBY
DIGITAL" to "D-PCM," "MPEG" to "PCM" and "DTS"
to "OFF" in the setup display (page 55). These are the
default settings.
* Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
17
Advertisement
Table of Contents
