Getting Started; Unpacking - Sony DVP-F11X Operating Instructions Manual

Getting
Started
This section describes how to hook up
the CD/DVD player to a TV (with
audio/video input jacks) and/or an
AV receiver (amplifier). You cannot
connect this player to a TV which
does not have a video input
connector. Be sure to turn off the
power of each component before
making the connections.
12

Unpacking

Check that you have the following items:
• Audio/video connecting cord (1)
• S video cord (1)
• AC power adaptor AC-F11 (1)
• AC power cord (1)
• Remote commander (remote) RMT-D109E (1)
• R6 (size AA) batteries (2)
• Stand SU-SF11 (1)
• Warranty Card (1)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and –
on the batteries. When using the remote, point it at the
remote sensor on the player.
z
You can control TVs and AV receivers (amplifiers) using the
supplied remote
See page 58.
Notes
• To avoid possible damage from battery leakage or corrosion,
observe the following:
- Be sure to insert the batteries with the + – polarities matched
to the + – marks.
- Do not use a combination of new and old batteries.
- Do not use different types of batteries.
- Dry batteries are not rechargeable.
- If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
- If batteries are leaking, wipe off the liquid in the battery
compartment carefully before replacing the batteries.
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.