Rps; Earthing Lead - 3Com 4500 Getting Started Manual

Standards Supported

RPS

Safety Requirements
EMC
Emissions
Immunity
Output Specifications

Earthing Lead

Safety Requirements
Voltage Rating
AWG
Insulation Thickness
Insulation Colour
SNMP
SNMP protocol (RFC 1157)
MIB-II (RFC 1213)
Bridge MIB (RFC 1493)
RMON MIB II (RFC 2021)
Remote Monitoring MIB (RFC
1757)
MAU MIB (RFC 2239)
MIB II Traps (RFC 1215)
RS232 (RFC 1659)
Interfaces (RFC 2233)
Ether-like MIB (RFC 2665)
MAU MIB (RFC 2668)
Bridge extensions (RFC 2674)
The RPS shall comply with the following safety standards:
EN60950, UL60950, CSA22.2 60950, IEC60950
CISPR 22 Class A, EN55022 Class A, FCC Part 15 Subpart B Class A,
ICES-003 Class A, AS/NZS 3548 Class A, VCCI Class A,
EN61000-3-2, EN61000-3-3
EN 55024
Must meet DC power supply specifications for each unit (as defined above).
The Earthing Lead shall comply with the following safety standards:
UL Subject 758, UL 1581 and CSA C22.2 No. 210
UL VW-1 and CSA FT1 Vertical Flame Test
600V
12
0.4mm
Green/Yellow
Terminal Emulation
Telnet (RFC 854)
Protocols Used for Administration
UDP (RFC 768)
IP (RFC 791)
ICMP (RFC 792)
TCP (RFC 793)
ARP (RFC 826)
TFTP (RFC 783)
DHCP (RFC 2131, RFC 2132, RFC 1534)
BOOTP (RFC 951, RFC 1497)
Network Login (IEEE 802.1x)
RADIUS (RFC 2618, 2620)
Link aggregation (IEEE 802.3ad)
RPS 123