Lexus LS460 2008 Owner's Manual page 671

Lubrication system
Oil capacity
(drain and refill)
with filter
without filter
Oil grade
Recommended oil
viscosity
Oil viscosity
● The 0W portion of the oil viscosity rating indicates a characteristic of the
oil which allows cold startability. Oils with a lower value before the W
allow for easier starting of the engine in cold weather.
● The 20 in 0W-20 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the
vehicle is operated at high speeds, or under extreme load condition.
9.1 qt. (8.6 L, 7.6 lmp.qt.)
8. 9 qt. (8.4 L, 7.4 lmp.qt.)
ILSAC multi-grade engine oil
Use Lexus approved "Toyota Genuine Motor Oil" or
equivalent to satisfy the grade and viscosity shown
below.
Outside temperature
0W-20 is an oil that provides optimal levels of fuel
efficiency.
6-1. Specifications
671
6