3-5. Using the hands-free system (for cellular phone)
®
Bluetooth
phone connection
There are two connection methods available—automatic and manual.
Press
STEP
1
Touch
STEP
2
Touch
STEP
3
Choose one of the following methods.
STEP
4
Reconnecting to the Bluetooth
■
If the system cannot connect due to poor signal strength with the "ENGINE START
STOP" switch in the ACCESSORY or IGNITION ON mode, the system will auto-
matically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this case, con-
nection must be made manually, or the phone must be re-selected.
420
.
on the "Information" screen.
on the "Telephone" screen.
®
phone
Automatic connection
If the "ENGINE START STOP"
switch is in the ACCESSORY or
IGNITION ON mode, the system
will automatically connect to the
®
Bluetooth
phone. Touching "Auto
Connect" will turn it on/off.
Manual connection
If automatic connection fails or is
turned off, connection must be
made manually.
If
the
message
connection
successful"
displayed, connection is complete.
*: Bluetooth is a registered trade-
mark of Bluetooth SIG. Inc.
"Bluetooth*
is