■
Adding engine oil
Make sure to check the oil type and prepare the items needed before
adding oil.
Oil grade
Items
Remove the oil filler cap.
STEP
1
Add engine oil slowly, checking the dipstick.
STEP
2
Install the filler cap, turning it clockwise.
STEP
3
About 1.6 qt. (1.5 L, 1.3 lmp. qt.) is required to raise the oil level from low to full on
the dipstick.
ILSAC multi-grade engine oil
Clean funnel
4-3. Do-it-yourself maintenance
If the oil level is below or near the
low level mark, add engine oil of
the same type as already in the
engine.
4
559