■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure below.
Close all the doors and switch the "ENGINE START STOP"
STEP
1
switch to IGNITION ON mode. (Perform the step 2 within 20
seconds.)
STEP
2
Function
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking function
Driver's door linked door unlocking
function
When the setting or canceling operation is complete, all doors are locked
and then unlocked.
1-2. Opening, closing and locking the doors and trunk
Shift the shift lever to "P" or "N",
and press and hold the driver's
door lock switch (
approximately 5 seconds and then
release.
The shift lever and switch positions
corresponding to the desired func-
tion to be set or canceled are
shown as follows:
Shift lever position
P
N
or
) for
Switch position
1
51