TO INSTALL DEPTH STAKE (See Fig. 4)
•
Remove screw(s) securing depth stake to skid and
discard the screw(s).
•
Slide depth stake down into transport arm track, lin-
ing up a hole in the depth stake with hole in transport
arm.
•
Install clevis pin and hairpin clip.
TILLING WIDTH
•
Tilling width may be adjusted to better handle your
tilling con di tions (See "TINE ARRANGEMENT" in the
Service and Adjustments section of this manual.)
TINE OPERATION
•
Check tine operation before first use. (See "TINE
OPERATION CHECK" in the Service and Adjustments
section of this manual.)
ASSEMBLY
DEPTH
STAKE
CLEVIS PIN
HAIRPIN CLIP
Fig. 4
5