Receiving A Message (Conventional Operation Only); Responding To Emergency Alerts E (Conventional Operation Only) - Motorola CDM1550 LS+ User Manual

y or z to locate the desired message
4
in the preprogrammed list.
–or–
when using the enhanced keypad
microphone only,
enter the number of the message you
wish to send.
–or–
if programmed by your dealer (see page 27),
press the button that has been
preprogrammed for a specific message.
50
English
RECEIVING A MESSAGE
(CONVENTIONAL OPERATION ONLY)
When your radio receives a message:
• You hear two alert tones.
• The yellow LED indicator flashes.
• You see:
alternating with the preprogrammed alias.
Note: If you receive a message that is
programmed into your radio, the display will
alternate with the following:
and
RESPONDING TO EMERGENCY
ALERTS E
(CONVENTIONAL OPERATION ONLY)
Your radio offers choices for initiating and
responding to Emergency Alert
communications. Choices may include:
• Emergency Cycles - Allows the radio to
automatically cycle between transmit and
receive mode over a preprogrammed
number of times by keying with voice after it
Msg Received
Message #_
No Alias