Table of Contents
Advertisement
A factory restart of your station will return it to its default
settings and "out of the box" condition. This may resolve
connection issues with your sensor.
1. Be sure there are fresh batteries in your sensor and station.
2. Hold the ALERTS and LIGHT button together for
5 seconds to restart the station.
Position
• To mount the sensor, use the hole at the top to either
hang it from the back using a nail, or insert one
mounting screw through the front of your sensor.
• Mount the TX141TH-Bv2 sensor on a north-facing
wall or in any shaded area. Under an eave or deck rail
is preferred.
• The maximum wireless transmission range to your
weather station is over 330 feet (100 meters) in open air,
not including walls or floors.
• Be sure the sensor is mounted vertically, to allow
moisture to drain out properly.
• Watch sensor mounting video:
http://bit.ly/TH_SensorMounting
Page | 15
Station Restart
TX141TH-Bv2
www.lacrossetechnology.com/support
Sensor
S84107
Hide quick links:
Advertisement
Table of Contents
