Let's Get Started - La Crosse Technology S84107 Instruction Manual

1. Insert 2 AA batteries into your
sensor. Observe correct polarity.
∙ The red LED light will flash when
your sensor transmits.
∙ The TX button lets you manually
transmit a signal.
2. Insert the 5V power cord into an
outlet, and then into your weather
station.
Optional: insert 3 AA batteries into
you station for time and date
backup.
3. Configure basic settings.
4. After 5 minutes, place your
sensor outside in a shaded
location.
S84107

Let's Get Started

www.lacrossetechnology.com/support
LED
TX button
AA
AA
AA
Page | 2