Table of Contents
Advertisement
D EL ET E S E NSO R S
1. Press and release the SENSOR button to view sensor type and ID.
2. Hold the MINUS button to delete the sensor from the station.
3. Deleted sensor can no longer show on station. Batteries should be removed.
4. Station will automatically search for a replacement sensor of the same type.
Example: Delete a Wind sensor, the station will search for a new Wind sensor.
5. If replacing a sensor, insert batteries into the new sensor. Once station receives sensor, press the
SENSOR button to confirm sensor ID.
Note: Deleted, working, Sensors with batteries installed, may still pass through to the app but will no longer
show on the station.
LOW BATT E RY IND ICATO RS
• Low battery by Outdoor Temperature, replace batteries in the TH sensor.
• Low battery by Wind, replace batteries in the Wind Sensor.
• Low battery by Rain, replace batteries in the Rain Sensor.
• Low Battery by Indoor Temperature, replace batteries in Station.
• Low Battery by Extra Sensor, replace batteries in Extra Sensor.
FAC TO RY RE START STAT ION
A factory restart of your station will remove all sensor ID numbers and Wi-Fi settings and return it to its
default settings and "out of the box" condition.
This may resolve connection issues with your sensors or Wi-Fi.
1. Hold the RAIN and LIGHT buttons together for 5 seconds.
2. Your station will reset and search for all sensors.
3. Allow up to 3 minutes to reacquire all sensors.
4. You will need to reconnect to your La Crosse View app by selecting CONNECT WIFI from the menu in
your La Crosse View App and entering your Wi-Fi password.
Wi-Fi Professional Station
WIND SPEED
MPH
TOP
SPEED
1 HR
WIND SPEED
MPH
TOP
SPEED
1 HR
Page | 17
Advertisement
Table of Contents
